The Most Common Problems with the Echo Cs-310 Chainsaw

Echo Cs 310 is a budget-friendly model for non-professionals or homeowners, and this chainsaw is much more compact or sleek in design, which makes it a portable saw.

Though the petrol chainsaw does have some problems which users may face while opting for this chainsaw but all Echo cs- 310 problems are resolvable and can be resolved by just following some simple steps.

Surferhandy will illustrate all of the issues that users of this saw may encounter along with their possible solutions.

Echo cs- 310 contains some problems, mainly dumping the oil while using or placing the saw; the top metal cover must be checked to correct the issue.

Moreover, the saw’s engine sometimes does not work according to the users’ instructions, and to restore the machine’s memory, some shocks should be given, which will be discussed later in the article.

Lastly, poor top-end RPMs also cause trouble to the saw by affecting the bars and spark plug working, and this must also be cured timely to avoid further issues.

Echo Cs-310 Problems 

Echo cs 310 problems cause troubles to the users as the saw is for budget-friendly users who can not afford to have fixed the issues regularly, which not only affects working but causes them extra costs.

Mainly, the saw causes the problem of oil dumping, which requires changing the metal cover of the oil tank, which will cost the user additionally.

In contrast, when the saw does not work according to the user, that needs to be fixed by switching the carbs direction and giving work shocks to the saw; this causes extra time to the users which they could otherwise have spent working.

Lastly, the poor RPMs also need to be aligned, which involves several steps that cause time and money to the users, which could be quite annoying for such a class of customers. 

Common Problems With Echo-cs 310 And Their Respective Solutions 

Here are some common problems that may happen to the Echo cs 310 saw, along with a detailed overview of their respective solutions. 

Dumps Oil 

Echo Cs 310 is seen to dump the oil from the oil tank, which may irritate the user while carrying out the work; sudden leakage may increase the work as extra cleaning may now be required. Moreover, the oil leakage continues if the saw is positioned in the sitting style; this makes the users cautious as they always need to set the saw in a standing rather than a sitting position.

The probable reason behind this leakage is the tank’s seal, which is not placed correctly. However, the seal is metal, but it may be turned from any of the sides, letting the oil come out of the oil tank, especially when using the saw or when the saw is in a sitting position.

The problem can be fixed by fixing the metal seal of the oil tank, which should be replaced with a new oil tank cap.

Check if the matter has been resolved because the issue remains unresolved even after changing the lid. Then, the oil line is problematic and needs to be fixed. First, make the oil tank emely, now make the saw move upside down so that it can be checked whether the oil line is leaking. 

Afterwards, loosen the screws of the engine mount and start to pull out the oil line from the oil filter. A nose plier or needle should do this. Replace the old oil line with the new one, and now check if the filter is still leaking or has been fixed. If the problem gets resolved, then put the screws back and lock the engine.

It does Not Work According To the User’s Instructions 

In the middle of the working, echo cs 310 starts to work opposite to the user’s needs or instructions; this becomes quite bothersome for the user as it may result in a less productive final output of the work.

However, this happens due to the improper adjustment of the carb, which needs to be fixed so that the chainsaw can work properly and does not make a mess during the work.

To fix this issue, one should start the saw’s engine and let the machine reach its operating temperature. Afterwards, the choke must be flashed two times which should be followed by turning off the engine. 

First, make the speed of the engine move at the highest level, then slow down and let the machine have the lowest rate; this should be followed by idle engine adjustment, where the screw should be adjusted in a way that the chain starts to spin for one time and should stop the other time. 

Simultaneously, adjust the speeds of the engine in a way that the engine starts to give smooth and steady results in terms of acceleration. This is important, and all the steps should be followed patiently so that the engine may provide the required results. The chainsaw should get used to working according to the user’s instructions rather than by its means.

Poor Top End RPMs

Poor top-end RPMs are an issue; users sometimes notice that fuel is not leaking, but the fuel filter seems to have clogging issues; this could be due to poor RPMs. Stretched chain, clogged spark arrestor and bent bar could be a reason behind poor RPMs.

This issue needs to be watched carefully and must be resolved first to escape the clogged spark arrestor by changing or replacing the hoses.

Now move towards checking it out by removing the top cover, disconnecting the wire and booting off the spark plug. The removal of the clutch cover and removal of the saw chain should follow this. After removal, the new chain must be aligned facing the front of the chain bar and must be kept away from the chain bar bottom loop.

Now make an effort to replace the bar cover with the new one along with a new chain guard if possible. Alignment of the chain bar is important, which should be done properly, and after completing the above steps, the cover must be kept again in its last place.

Conclusion 

The article above illustrates the in-depth explanation of the echo cs 310 problems which include; dumping of oil, saw not following the user’s instructions and poor top-end RPMs. All of these can cause extra cost and extra time to the users, which can be quite annoying at times.

Though the article also states the main substitutes of the echo that are; Husqvarna 240, Blue max 8901 and Remington RM4214. These all are available in the market for the users to choose from if they are too offended by the problems of the echo cs 310.