Snowblowers are a handy and valuable tool, especially if you live in an area where winter stays throughout or through a significant part of the year.
During these months blowing snow off your way becomes an arduous task.
However, this previously challenging task has been made easy for you through the introduction of Toro’s snowblower.
No matter what goes down, this snowblower will never leave your side and ensure that you, in the most convenient way, get rid of the snow that might be blocking your way.
But since it is a portable machine, the snowblower requires its parts to move to assist the function it claims to perform.
Therefore, issues can often materialize, such as snowblowers leaking gas.
Let’s find out why my Toro snowblower leaks gas every time it works to remove the snow from your way.
Toro Snowblower Leaking Gas Causes
Out of the many problems that can materialize in your Toro’s snowblower, the one that causes the most nuisance is the Toro snowblower leaking gas.
This is not only problematic in terms of hindering your work but also because refilling the gas again and again in the snowblower is costly too.
How much can you spend on gas in your Toro snowblower because it leaks? So let’s find out the causes for why is my Toro snowblower leaking gas.
Problematic Carburetor Bowl Gasket
The carburetor of your Toro’s snowblower, is responsible for handling combustion by making sure the fuel and air mix with each other in the precise amount to get the engine starting.
Hence, the carburetor plays a crucial role in fuel and its combustion, so plausibly we can assume that an issue in the carburetor can be a reason for the fuel to be leaking out of your snowblower.
Now the problem here is not the carburetor directly but another associated part. This carburetor bowl is located at the bottom of the component and is where the fuel is stored after some gas has been used.
Gasket of the carburetor looks like a thin and narrow rubber band, and you will find it within the carburetor and the bowl. Due to the engine’s proximity, the gasket can become brittle, dry, and more likely to fail.
It can also become thinner than it originally was by being shrunk through exposure to the engine’s released heat.
Extreme engine temperature will cause the gasket to dry out gradually, becoming even more brutal and no longer functioning.
To restore the functioning of this gasket, it must be replaced and prevent your Toro snowblower from leaking gas.
Float Is Stuck
Supposedly that you have established that the reason why is my Toro snowblower leaking gas is not related to any issues in the carburetor. In such a situation, you consider that the float in the snowblower might be stuck.
Float located near the carburetor’s opening often tends to end up stuck in the resulting, permitting the fuel to overflow and leak out of the carburetor. Thus being a reason for your gas leakage.
An essential function of the float in your snowblower is regulating the amount of gas stored inside the carburetor bowl.
When the float fails to come through with its function by becoming stuck and rigid because of fuel deposits, it would have to be unstuck and the carburetor cleaned to prevent a similar case from appearing in the future.
You may refer to the troubleshooting section if you are competent enough to troubleshoot a stuck float inside the carburetor.
Without reconsidering the situation, take your Toro snowblower leaking gas to a mechanic.
Damaged Fuel Lines
Another reason my Toro snowblower is leaking gas can be because of the lines undertaking the task of delivering fuel to the engine.
With continuous use of the snowblower, these fuel lines age and start to deteriorate in their condition as time passes.
Fuel lines become dry and sometimes cracked, resulting in the fuel not being adequately delivered to the engine and leaking.
Troubleshooting Leaking Gas In Toro Snowblower
Troubleshooting The Gasket
The only method through which you can troubleshoot the gasket and restore the normal and optimal functioning of your Toro snowblower where the gas isn’t leaking is by replacing the gasket.
You do not have to worry much about replacing this thin rubber, which looks like a band, because rest assured, the procedure it entails is straightforward.
Your first task will be to purchase a gasket most appropriate for your Toro snowblower’s model.
We recommend that you take your worn-out gasket to the retailer and ask them to provide you with a similar one.
If not, take note of the spec number and the model of your engine and ask a retailer to provide you with a suitable gasket.
After purchasing the gasket, shut out the gas supply of the snowblower by shutting off the valve at the bottom and near the fuel tank to do so.
Then wipe the carburetor so no dirt goes inside the component or its adjacent parts- the gasket and the bowl.
Next, unfasten the screws holding the carburetor and the bowl together to gain access to the gasket. Upon seeing the gasket take it out and replace it with the brand-new, you recently purchased one.
Lastly, fast all the screws tightly onto the carburetor and the bowl. Do not forget to turn the fuel pipeline you initially cut out on again.
Troubleshooting Stuck Float
While looking to troubleshoot the stuck float, you will also have to watch for the float needle because this is the specific part that gets stuck and hinders fuel regulation in the carburetor, causing your Toro snowblower to leak gas.
You can attempt to free up the needle by tapping at the carburetor with a rubber tool or a rubber mallet.
However, remember only to apply a limited amount of pressure because your tool might be made of rubber. Still, even a slightly hard tap to the carburetor can cause significant damage to the component.
Another thing to remember is that this is only a temporary fix and does not guarantee to work every time.
Anyway, you will end up in dire need of attaining professional help!
Troubleshooting Fuel Lines
There is no such complicated troubleshooting for damaged fuel lines apart from the advice that checks out all the lines and precisely try to identify the problematic ones.
Once you have, replace them so their operation is not hindered anymore.
While replacing the dried-out and cracked fuel lines of your Toro snowblower, remember to always switch off the fuel supply by shutting the valve near the bottom of the installed fuel tank.
Conclusion
Now that you are aware of most of the reasons why is my Toro snowblower leaking gas, we hope you can troubleshoot it successfully!
Frequently Asked Questions
**Is it possible to purchase the gasket online?**
Yes, you can purchase the gasket online but be cautious while selecting the model and consider the specs of your original gasket.
**How do I know the carburetor is not damaged?**
You check the carburetor to see whether there is any damage on it, basically by examining the condition of the gasket.
**Can I fix the float myself?**
No, you cannot. Fixing the float is much more complicated than you think.